Automated chilli watering system part 2 - Pre-reqs


This post is part of a series


Before we get started on the other parts of the system, a quick not about the basics I started with

The T Cobbler, while entirely optional, makes it much sumple to connect things to the RPi

TCobbler

You can see below what I mean

TCobblerWithBreadboard

Once you have the T Cobler connected to the RPi and the breadboard, bring out the 3.3v and the 5v to the outer rails of the breadboard as follows

BreadboardBasic

Thats the basics setup, you are ready for the next step now

See also